 |
| Spindles
- New - DRB60A Boosterless Drill/Router Spindle |
|
| |
Ball bearings
are known for their simple reliable service in a variety of operating
conditions. A high radial side load stability as well as low dynamic runout,
make a ball bearing spindle the choice for drilling and routing on the
same machine.
|
| |
|
| |
|
|
Speed:
0-60,000
RPM
Power output: 1
HP at 60,000 rpm
Weight: 7
lbs.-2 oz.
Overall Height: 9.5
in
Body dia: 2.43 in
Requires
no air booster, collet actuates at 125 psi supply pressure
Coolant flow: .5 GPM
Maximum static runout: .0002”
Maximum dynamic runout: 8µ /.00032”
Uses a Ř 1/8” I.D. collet with a 1.5ş taper |
|
| |
|
| |
Jevco
International Inc.'s DRB60A
Drill / Router high frequency electric spindle motor comes complete with,
an automatic pneumatic tool change, replaceable collet, and water-cooling.
This spindle combines high speed with low-end torque, in a very rigid
low vibration package.
The DRB60A is suitable to be offered on new production machines, as well
as a direct replacement on many of the worlds most popular drilling and
routing machines. As a direct replacement, this spindle requires no modifications
to the machine. In a new application these spindles can be configured
to the machines requirements.
£1580.00 (approx. €2450.00) + VAT & Carriage |
| |
|
| |
Setting
the standard… Service, Quality, and Value. |
| |
| Please
contact A & D for specific information. |
| |
|
| |
|
|
| |
|
| |
| |
