 |
| Spindles
- New - DR60A Drill/Router Spindle |
|
| |
Ball bearings
are known for their simple reliable service in a variety of operating
conditions. High radial side load stability as well as low dynamic runout,
make a ball bearing spindle the choice for drilling and routing on the
same machine.
|
| |
|
| |
|
|
Speed:
0-60,000
RPM
Power output: 1
HP at 60,000 rpm
Weight: 6 lbs.-6 oz.
Overall Height: 7.5 in
Body dia: 2.43 in
Requires 400-425 psi supply pressure for collet actuation. x7 air
booster recommended for supply air of 80-90 psi
Coolant flow: .5 GPM
Maximum static runout: .0002”
Maximum dynamic runout: 8µ /.00032”
Uses a Ř 1/8” I.D. collet with a 1.5ş taper |
|
|
| |
Jevco
International Inc.'s DR60A Drill
/ Router high frequency electric spindle motor comes complete with, an
automatic pneumatic tool change system, replaceable collet, and water
cooling. This spindle combines high-speed with low-end torque, in a very
rigid low vibration package.
The DR60A is suitable to be offered on new production machines, as well
as a direct replacement on many of the worlds most popular drilling and
routing machines. As a direct replacement this spindle requires no modifications
to the machine. In a new application these spindles can be configured
to the machines requirements.
£1560.00 (approx. €2420.00) + VAT & Carriage |
| |
|
| |
Setting
the standard… Service, Quality, and Value. |
| |
| Please
contact A & D for specific information. |
| |
|
| |
|
|
| |
|
| |
| |
